LB1233M 71598rm(ki) no. 5954-1/5 ordering number : en5954 LB1233M high-voltage/large-current darlington transistor array monolithic digital ic overview the LB1233M is a darlington transistor array using npn transistors. it is suitable for applications such as hammer drive, lamp control, relay drive, etc. it also incorporates a spark killer diode for the l load. features ? designed for high voltage (v ceo 3 50v), large current drive capability (ic max=500 ma) ? integrated base current limiting resistor ? direct drive capability with ttl, cmos output package dimensions unit:mm 3035a-mfp16 1 16 8 9 10.1 0.15 0.605 1.27 0.35 0.1 1.8max 1.5 0.625 4.4 5.15 6.4 sanyo electric co., ltd. semiconductor bussiness headquarters tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan [LB1233M] sanyo:mfp16 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability | such as life-support systems | aircraft ? s control systems | or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed | even momentarily | rated values (such as maximum ratings | operating condition ranges | or other parameters) listed in products specifications of any and all sanyo products described or contained herein.
LB1233M 71598rm(ki) no. 5954-2/5 ordering number : en5954 specifications absolute maximum ratings at ta = 25 c ratings unit symbol parameter applied output voltage output current applied input voltage ground pin current allowable power dissipation operating temperature storage temperature 50 500 30 2.8 0.39 ?0 to +75 ?0 to +150 v ma v a w c c v out i out v in i gnd tstg per unit all 7 channels on, f = 10 hz, duty = 5% pd max topr conditions allowable operating ranges at ta = 25 c symbol conditions ratings unit parameter applied output voltage input high level voltage input low level voltage v out v ih v il i out = 350 ma i out 100 a 50 3 to 30 -0.3 to +0.3 v v v electrical characteristics at ta = 25 c unit min typ max ratings symbol parameter v out = 50v i in = 0.25 ma, i out = 100 ma i in = 0.35 ma, i out = 200 ma i in = 0.5 ma, i out = 350 ma v in = 1 ma, i out = 400 ma v in = 3.85v v r (s) = 50v i f (s) = 350 ma i f (s) = 400 ma conditions output leakage current output voltage input current spark killer diode leakage current spark killer diode forward current i off v oh 1 v oh 2 v oh 3 v oh 4 i in i r (s) v f (s)1 v f (s)2 0.9 1.1 1.3 0.93 100 1.1 1.3 1.6 2.4 1.35 100 2.0 2.4 a v v v v ma a v v
LB1233M 71598rm(ki) no. 5954-3/5 ordering number : en5954 pdmax ?ta 0.23 0 0.1 -20 0 20 40 60 80 100 0.2 0.3 0.5 0.4 0.39 allowable power dissipation, pdmax C w ambient temperature, ta C ?c equivalent circuit 0 6 5 0 6 5 0 6 5 0 6 5 0 6 5 0 6 5 0 6 5 7 $ $ ( / % l
l
l
* / * / * / * / * / * / * / "
LB1233M 71598rm(ki) no. 5954-4/5 ordering number : en5954 0 80 120 160 240 280 320 360 40 0 20406080100120 10 30 50 70 90 110 440 400 200 0 5 1 2 3 4 6 7 8 9 02 20 4 6 8 10 12 14 16 18 22 24 26 28 30 10 allowable dutycycle ?% output current, i o ? ma i o ? allowable duty cycle i in ? v in v in =3v all 7 channels on input current, i in ?ma input voltage, v in ?v 50 c ta=25 c 75 c 0 2 4 6 8 10 12 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 0.2 0.4 0.6 0.8 1.0 1.2 0 800 100 200 300 400 500 600 700 3.0 0.01 0.1 1.0 10 0.1 1.0 3 2 357 2 3 3 5 5 7 7 2 2 3 5 7 2 i f ? v f i in ? v in v in =3v ta=25 c input voltage, v in ?v input current, i in ?ma input current , i f ?ma output current, i o ?a input voltage, v f ?v output saturation voltage, v o (sat) ?v v o (sat) ? i o 0 4 8 121620242832 2 6 10 14 18 22 26 30 i out = 100ma i out = 200ma i o u t = 300ma
LB1233M 71598rm(ki) no. 5954-5/5 ordering number : en5954 this catalog provides information as of july, 1998. specifications and information herein are subject to change without notice. ps specifications of any and all sanyo products described or contained herein stipulate the performance | characteristics | and functions of the described products in the independent state | and are not guarantees of the performance | characteristics | and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device | the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co. | ltd. strives to supply high-quality high-reliability products. however | any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives | that could give rise to smoke or fire | or that could cause damage to other property. when designing equipment | adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design | redundant design | and structural design. in the event that any and all sanyo products described or contained herein fall under strategic products (including services) controlled under the foreign exchange and foreign trade control law of japan | such products must not be exported without obtaining export license from the ministry of international trade and industry in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means | electronic or mechanical | including photocopying and recording | or any information storage or retrieval system | or otherwise | without the prior written permission of sanyo electric co. | ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement | etc. when designing equipment | refer to the ? delivery specification ? for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ? it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable | but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
|
